Lucky Reptile Thermo Socket PRO

The Bright Sun UV is a revolutionary UV lamp that offers light, heat and UV in one lamp at low wattages.

A Bright Sun UV Desert 70W offers comparable heat and UV output than a 160W mercury vapour based UV lamp but its light output is 5 times higher! (...)

The Bright Sun UV Jungle was developed especially for reptiles from tropical and forest regions.

• It has a slightly lower UV performance than the Bright Sun UV Desert taking the different conditions in the natural habitat of these animals into account.
• Branches and leaves filter quite a lot of UV, so the animals do not experience the full intensity of the sun. (...)

Because of their sun-like radiation properties, ULTRAVITALUX lamps are used in industrial material testing, particularly for
testing materials and equipment in different environments to DIN 50 010:

• Suitability for use in the tropics
• Artificial ageing (...)

The Bright Control HQ is a ready to use gear box for mercury vapour lamps like Osram HQL.

• The ballast is installed out of touch inside a gear box together with a capacitor.
• This way you have a safe electrical installation which is ready to use.
• There is no need to do any electrical wiring, a connector enables easy attachement to a lampholder. (...)

The Bright Control is necessary for operating Bright Sun UV lamps. It contains ballasts,
ignitor and a capacitor inside a gear box and is ready for use with a connector.

• A suitable lampholder has to be purchased separately. (...)

The Bright Control PRO is an electronic ballast designed for optimal use with the Bright Sun UV lamps.

• An electronic ballast should be preferred over an electromagnetic ballast as it is more efficient and increases the lamp life.
• It ensures a smoother operation and increases the effectiveness of the lamp.
• The spectrum of metal halide lamps will stay fairly constant during its life cycle when using electronic ballasts. (...)

The Bright Control HQ is a ready to use gear box for mercury vapour lamps like Osram HQL.

• The ballast is installed out of touch inside a gear box together with a capacitor.
• This way you have a safe electrical installation which is ready to use.
• There is no need to do any electrical wiring, a connector enables easy attachement to a lampholder. (...)

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.

These heat resistant porcelain lampholders are suitable for all incandescent bulbs, ceramic heat emitters and UV spot lamps (i.e. Osram Vitalux, Zoo Med PowerSun) with E27 socket.

• To attach a power cord to the lampholder you have to unscrew the base.
• For doing so you have to push down the retention pin inside the lampholder (e.g with a screwdriver) and unscrew the upper ring.