JBL ProFlow Mini 400

JBL ProFlow Mini pumps are specially designed for applications requiring small dimensions and high performance. The mains cable leads from the uppermost side of the appliance, to avoid wasting space on the side as with pumps with side mains cables. Ideally suited, for example, as output pump in clear water chambers of bio-filters in freshwater as well as in saltwater.
The shallow minimum water depth of 3 cm makes these the ideal pumps for aqua terrariums or indoor fountains.
The pump capacity can be varied within a wide range, making it suitable for practically any application. The hose connector support can be rotated 360°, making optimum use of the available space. Suitable for hoses of 12 x 16 mm diameter. An integrated thermal protector circuit prevents overheating by switching the motor off (e.g. jammed rotor etc.).


Important safety notice:

JBL AquaFlow Pumps comply with DIN VDE 0700 Section 41 EN 60335-2-41 safety regulations

1. Make sure the voltage stated on the appliance corresponds to the electrical supply in your location.
2. The appliance must always be disconnected from the power supply before being handled.
3. The supply cable cannot be repaired or replaced. If the cable is damaged, the appliance must be discarded.
4. The appliance must not be used in a bathroom.
5. The pump must not run dry.
6. The appliance must not be used outside.
7. The temperature of the liquid to be pumped must not exceed 35°C.
8. The maximum depth of immersion is 1 metre.
9. We recommend connection to a ground-fault circuit interrupter with basic trip current of up to 30 mA.